Montana Well Data › Park County
Park County, Montana: well depth, water level & drilling cost
✓ 6,550 GWIC records · verified 2026-06-10
How deep are wells in Park County, Montana?
The median drilled well depth in Park County is 107 ft, based on 6,381 wells with recorded depths in the state GWIC database. Half of all wells fall between 55 ft and 205 ft; 90% are shallower than 302 ft. Wells drilled since 2016 have a median depth of 178 ft.
How much does it cost to drill a well in Park County?
Applying published per-foot rates to the local median depth of 178 ft: drilling and casing alone typically runs $4,450–$11,570; a complete system including pump, pressure tank, and hookup typically runs $10,680–$19,580. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Park County?
The median static water level is 38 ft below ground surface (middle half of wells: 18 ft–78 ft), from 5,802 measurements.
How much water do wells in Park County produce?
The median tested yield is 25 gpm (middle half: 14 gpm–45 gpm), from 5,700 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Park County?
Companies by number of wells completed in this county since 2016, per filed well logs.
| Drilling company | Wells since 2016 |
|---|---|
| HAYES DRILLING | 447 |
| RED TIGER DRILLING | 149 |
| POTTS DRILLING INC | 93 |
| VAN DYKEN DRILLING INC | 43 |
| OKEEFE DRILLING CO | 28 |
| BRIDGER DRILLING INC | 19 |
| DIAMOND M DRILLING INC | 19 |
| OLD TOWN DRILLING | 17 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-10) to the local median depth — full methodology & sources.