⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Silver Bow County › Butte (59750)

Butte, MT (59750): well depth, water level & drilling cost

✓ 500 GWIC records · Silver Bow County

115 ftmedian well depth
47 ft–240 fttypical depth range
37 ftmedian static water level
20 gpmmedian yield (370 tests)

Pull every recorded well near a Butte (59750) address — $49

How deep are wells in and around Butte (59750), Montana?

The median drilled well depth in and around Butte (59750) is 115 ft, based on 484 wells with recorded depths in the state GWIC database. Half fall between 47 ft and 240 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Butte (59750)?

Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Butte (59750)?

The median static water level is 37 ft below ground surface (middle half of wells: 16 ft–78 ft), from 409 measurements.

Drilled depth distribution

0–50 ft 131 50–100 ft 80 100–150 ft 85 150–200 ft 43 200–300 ft 47 300–400 ft 41 400–600 ft 41 600+ ft 16
Looking at a specific property in Butte (59750)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Butte (59750)

Free. Goes to licensed drillers working Silver Bow County.

Part of Silver Bow County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.