⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Cascade County › Simms (59477)

Simms, MT (59477): well depth, water level & drilling cost

✓ 311 GWIC records · Cascade County

33 ftmedian well depth
25 ft–40 fttypical depth range
16 ftmedian static water level
20 gpmmedian yield (234 tests)

Pull every recorded well near a Simms (59477) address — $49

How deep are wells in and around Simms (59477), Montana?

The median drilled well depth in and around Simms (59477) is 33 ft, based on 294 wells with recorded depths in the state GWIC database. Half fall between 25 ft and 40 ft; 90% are shallower than 100 ft.

How much does it cost to drill a well in and around Simms (59477)?

Applying published per-foot rates to the local median depth of 33 ft: drilling and casing alone typically runs $825–$2,145; a complete system including pump, pressure tank, and hookup typically runs $1,980–$3,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Simms (59477)?

The median static water level is 16 ft below ground surface (middle half of wells: 11 ft–23 ft), from 203 measurements.

Drilled depth distribution

0–50 ft 234 50–100 ft 26 100–150 ft 17 150–200 ft 5 200–300 ft 8 300–400 ft 0 400–600 ft 4 600+ ft 0
Looking at a specific property in Simms (59477)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Simms (59477)

Free. Goes to licensed drillers working Cascade County.

Part of Cascade County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.