⟁ Montana Well Data field records · 2026 survey

Montana Well Data › Daniels County › Flaxville (59222)

Flaxville, MT (59222): well depth, water level & drilling cost

✓ 236 GWIC records · Daniels County

50 ftmedian well depth
32 ft–93 fttypical depth range
33 ftmedian static water level
7 gpmmedian yield (131 tests)

Pull every recorded well near a Flaxville (59222) address — $49

How deep are wells in and around Flaxville (59222), Montana?

The median drilled well depth in and around Flaxville (59222) is 50 ft, based on 233 wells with recorded depths in the state GWIC database. Half fall between 32 ft and 93 ft; 90% are shallower than 157 ft.

How much does it cost to drill a well in and around Flaxville (59222)?

Applying published per-foot rates to the local median depth of 50 ft: drilling and casing alone typically runs $1,250–$3,250; a complete system including pump, pressure tank, and hookup typically runs $3,000–$5,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Flaxville (59222)?

The median static water level is 33 ft below ground surface (middle half of wells: 16 ft–50 ft), from 142 measurements.

Drilled depth distribution

0–50 ft 115 50–100 ft 62 100–150 ft 29 150–200 ft 11 200–300 ft 10 300–400 ft 2 400–600 ft 3 600+ ft 1
Looking at a specific property in Flaxville (59222)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Flaxville (59222)

Free. Goes to licensed drillers working Daniels County.

Part of Daniels County well records.

Method: medians computed from GWIC records (site type WELL, non-abandoned; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.